APV Homogenising Valves

APV homogenising valves are the core wear components of the homogenising assembly. They directly influence pressure stability, droplet/particle size reduction, and overall process consistency. At BOS-Homogenisatoren, we supply APV-compatible homogenising valve components designed for reliable performance in demanding hygienic and industrial applications.

If you are planning maintenance, troubleshooting pressure loss, or upgrading materials for longer lifetime, our parts program supports a wide range of APV homogenisers with fast delivery and technical support. Start here: Ersatzteile or go directly to Kontakt.

If you are searching for specific APV homogenising valve part article numbers or want to verify which parts match your homogeniser, you can consult our complete spare parts overview at Homo-Ventilteile oder homo-Ventilkomponenten.

Key Designs: Plug Valve, Pilot Valve, Knife Edge and Microgap Valve

APV homogenising valve configurations vary by application, product characteristics and required pressure range. BOS Homogenisers supplies components for common valve concepts including:

• Stopfenventil configurations for controlled restriction and stable operation
• Vorsteuerventil arrangements (often used to stabilize pressure and flow behavior across stages)
• Messerschneide style geometries where edge definition and surface condition are critical for performance
• Microgap-Ventil designs where a precisely controlled micro-gap determines shear and turbulence intensity

For complete support across the homogenising assembly, also see: Homogenising Valves.

Materials for Wear Resistance: Ceramic Valve, Stellite Valve and TC Valve

Material choice is often the fastest route to longer run time and lower cost per operating hour. BOS Homogenisers supplies parts that match common APV performance requirements, including:

• Keramisches Ventil components for strong corrosion resistance and stable performance in aggressive CIP regimes
• TC-Ventil (tungsten carbide) components for high hardness and abrasion resistance
• Stellit-Ventil solutions where wear resistance is required under demanding process conditions

Material selection is typically determined by product abrasiveness, operating pressure, temperature, cleaning chemistry, and required lifetime. If you want guidance, use our contact form and share your homogeniser model plus operating conditions.

Homogenisieren von Ventilsitzen und Schlagringen

Homogenisierung von Ventilsitzen are critical sealing and wear surfaces. In practical terms, seat condition often determines whether a homogeniser can reach and hold target pressure. Worn seats can cause pressure instability, reduced homogenising efficiency, and accelerated wear of the valve and mating surfaces.

Schlagringe are equally essential. They contribute to the final stage of homogenisation by impact and protect the valve body/housing from erosive wear. Choosing the correct impact ring material and geometry is especially important when operating with high-pressure settings or abrasive products.

To keep maintenance structured and predictable, we recommend planning spare parts as a kit: valve + seat + impact ring (and where applicable, related holders and guides). Visit: Dienst

APV Machines for Which We Deliver Spare Parts

BOS Homogenisers supplies spare parts support for APV machines, including the model series below. For requests, contact our support.

Request the Right APV Homogenising Valve Set

To quote the correct combination of plug valve / pilot valve geometry, knife edge surface requirements, or a microgap valve configuration, together with ceramic valve, stellite valve or TC valve wear parts, please share:

• Your APV model (e.g., APV 1000 / APV 2000 / Lab series)
• Operating pressure range and product type
• Whether you need homogenising valve seats and impact rings included

Zugehörige APV-Ersatzteile

Suchen Sie weitere Ersatzteile für APV-Homogenisatoren? Sehen Sie sich unser komplettes Sortiment an APV-Ersatzteilen an:

• APV-Pumpenventile – Ventile für Saug- und Druckpumpen
• APV-Zylinderblöcke – Präzisionszylinderblöcke
• APV Aktuator-Packungen – Dichtungen für Stellantriebe
• APV-Zylinderblock – Präzisionszylinderblöcke
• APV-Kolben – Hochdruckkolben

Alle APV-Ersatzteile anzeigen →

Kompatible Alternativen anderer Marken

Suchen Sie Ersatzteile für Homogenisierventile anderer Homogenisierermarken? BOS Homogenisers liefert kompatible Ersatzteile für alle gängigen Marken:

Rannie Homogenisierventilteile | Bos Homogenisierventil Teile | SPX Homogenisierventilteile