Bos Cylinder Blocks – New or 2nd Hand Replacement Solutions

Bos cylinder blocks are critical structural components within the liquid end of Bos Homogenisers. They form the foundation of the high-pressure section of the machine and ensure correct alignment of plungers, valves, and sealing systems. Because cylinder blocks operate under extreme mechanical and hydraulic loads, their condition directly affects pressure stability, sealing performance, and overall machine reliability.

Au Homogénéisateurs Bos, we supply precision-manufactured Bos cylinder blocks for our complete homogeniser range. Depending on your maintenance strategy and operational requirements, we offer both new or 2nd hand cylinder block solutions. Our focus is to deliver technically correct replacements that maintain the original performance standards of your Bos homogeniser.

If you are searching for specific Bos cylinder block article numbers or want to verify which parts match your homogeniser, you can consult our complete spare parts overview at cylinder parts.

What Are Bos Cylinder Blocks?

The cylinder block is the main pressure-bearing component of the homogeniser liquid end. It houses the plunger bores and valve chambers and provides the structural support necessary for high-pressure homogenisation. During operation, the plungers reciprocate inside precisely machined bores, generating pressure that forces product through the homogenising valve assembly.

Bos cylinder blocks must withstand:

• High internal hydraulic pressures
• Continuous cyclic mechanical loading
• Thermal stress from product and CIP cleaning
• Chemical exposure from cleaning agents
• Mechanical forces from valve impact and product flow

Because of these demanding conditions, dimensional accuracy and material integrity are essential to ensure safe and stable operation.

Types of Bos Cylinder Blocks

Different types of Bos cylinder blocks are used across our homogeniser portfolio. The correct execution depends on machine size, pressure range, and application requirements.

Standard Production Cylinder Blocks

Designed for dairy, food, and beverage applications, these cylinder blocks support consistent high-pressure operation and long service intervals.

High-Pressure Cylinder Blocks

For applications requiring elevated pressures, reinforced cylinder block configurations provide the structural integrity needed to maintain dimensional stability under extreme load.

Laboratory and Pilot Cylinder Blocks

Compact cylinder blocks designed for smaller-capacity machines used in R&D, product testing, and pilot production environments.

Custom and Special Application Cylinder Blocks

For unique industrial applications or specific process conditions, Bos Homogenisers can advise on the appropriate cylinder block configuration to ensure compatibility and operational safety.

New or 2nd Hand Bos Cylinder Blocks

Maintenance strategies differ between facilities. Some operators prefer new components to maximize lifetime, while others choose refurbished solutions for cost efficiency. Bos Homogenisers offers both new or 2nd hand cylinder block options.

New Cylinder Blocks

• Manufactured to original Bos dimensional specifications
• Maximum service life
• Ready for integration into overhauled liquid ends
• Suitable for long-term maintenance planning

2nd Hand Cylinder Blocks

• Carefully inspected and assessed for reuse
• Cost-effective alternative for specific maintenance cases
• Shorter lead times depending on availability

Regardless of selection, proper matching to machine type and pressure configuration is essential.

Mécanismes d'usure et de défaillance courants

Over time, cylinder blocks may develop wear due to operational stress. Common issues include:

• Plunger bore wear leading to leakage
• Surface scoring caused by contamination
• Corrosion from aggressive cleaning solutions
• Valve chamber erosion in abrasive applications
• Fatigue damage from long-term cyclic loading

Operating with a worn cylinder block can accelerate wear of packings and plungers, increase leakage, and reduce pressure consistency. Timely replacement protects the full liquid end assembly and maintains product quality.

Precision Engineering and Quality Control

All Bos cylinder blocks are manufactured or selected to ensure correct alignment of plunger bores and valve chambers. Proper alignment supports:

• Stable pressure generation
• Uniform load distribution on packings
• Reduced vibration
• Predictable maintenance intervals

Bos Homogenisers ensures that each cylinder block supplied is suitable for the intended machine series and application.

Industries Using Bos Cylinder Blocks

Bos homogenisers are used in a wide range of industries, including:

• Transformation laitière
• Production de denrées alimentaires et de boissons
• Fabrication de produits pharmaceutiques
• Traitement chimique
• Industrial fluid processing

Each application has specific demands regarding pressure, hygiene, and cleaning procedures. Bos Homogenisers supports customers in selecting the correct cylinder block type for their operational requirements.

Homogénéisateurs Bos BOS pour lesquels nous fournissons des pièces de rechange

Bos Homogenisers supplies cylinder blocks and spare parts for the complete Bos homogeniser range:

Request a Quote for Bos Cylinder Blocks

If you are looking for Bos cylinder blocks, whether new or 2nd hand, Bos Homogenisers can provide the correct replacement solution for your machine.

Contact Homogénéisateurs BOS pour un devis. Indiquez le modèle de votre machine, le numéro de série, la pression de fonctionnement et les détails de l'application. Nos spécialistes s'assureront que vous recevez le bloc-cylindres adéquat pour des performances optimales et une longue durée de vie.

Pièces de rechange BOS associées

Vous recherchez d'autres pièces de rechange pour les homogénéisateurs BOS ? Découvrez notre gamme complète de pièces de rechange BOS :

• Bos Homogénéisateur Blocs-cylindres – Blocs-cylindres de précision
• Pièces pour la vanne d'homogénéisation Bos – Soupapes, sièges et anneaux de choc
• Bos Anneaux de guidage de l'homogénéisateur – Bagues de guidage de précision
• Anneaux de secours de l'homogénéisateur Bos – Bagues d'appui pour l'étanchéité haute pression
• Bos Anneaux d'impact de l'homogénéisateur – Anneaux de protection résistants à l'usure et aux chocs

View all spare parts →

Alternatives compatibles proposées par d'autres marques

Looking for cylinder blocks for other homogeniser brands? BOS Homogenisers supplies compatible replacements across all major brands:

Blocs-cylindres Rannie | Blocs cylindriques Gaulin | Blocs-cylindres SPX | Blocs-cylindres APV