Gaulin Suction Valves – OEM Inlet Valves for High-Pressure Homogenisers

Looking for a reliable replacement Gaulin suction valve? Bos Homogenisers supplies OEM-compatible suction valves designed for Gaulin high-pressure homogenisers. These inlet valves are critical pump components that control product intake, ensure stable flow, and protect the pump from pressure loss and backflow.

Whether you operate a dairy homogeniser, pharmaceutical production unit, or biotech processing line, a properly functioning suction valve is essential for safe, efficient, and consistent operation.

If you are searching for specific Gaulin suction valve article numbers or want to verify which parts match your homogeniser, you can consult our complete spare parts overview at pump valve components または ホモバルブ部品.

What Is a Gaulin Suction Valve?

A suction valve, also known as an inlet valve, is installed on the low-pressure side of the homogeniser pump. During the suction stroke of the plunger, the valve opens to allow product to flow into the pump cylinder. When the plunger reverses direction and pressure increases, the suction valve closes, preventing backflow.

In Gaulin homogenisers, suction valves are precision-engineered components designed to operate at high cycling speeds while maintaining hygienic sealing and long service life.

Function of the Suction Valve in a Gaulin Homogeniser

• Allows controlled product intake into the pump cylinder
• Prevents reverse flow during the compression stroke
• Maintains volumetric efficiency of the pump
• Stabilises inlet pressure and flow rate
• Protects downstream components from cavitation

A worn or damaged suction valve can cause serious performance issues, including loss of capacity, unstable pressure, and increased wear on plungers and seals.

Typical Applications

Gaulin suction valves supplied by Bos Homogenisers are used in a wide range of industries, including:

• Dairy processing (milk, cream, yogurt)
• 食品・飲料製造
• 医薬品製造
• Biotechnology and cell disruption
• Cosmetics and emulsions

Each application places different demands on the valve in terms of pressure, temperature, chemical resistance, and cleaning cycles.

ゴーリンホモジナイザー対応機種

Bos Homogenisers supplies suction valves for most Gaulin machines, including:

• ゴーリンMCシリーズ（MC15、MC45、MC100、MC200、MC400）
• シングルステージおよび2ステージホモジナイザー
• Legacy and discontinued Gaulin models (on request)

Correct valve selection is based on model, pump size, pressure rating, and product characteristics. Providing the serial number ensures exact compatibility.

Suction Valve Design and Materials

Gaulin suction valves are exposed to continuous mechanical movement and product contact. For this reason, material selection is critical. We offer suction valves manufactured from:

• 316L stainless steel – standard food-grade material
• Stellite® alloys – increased wear resistance
• Hardened stainless steel – extended service life

Valve seals and gaskets are available in FDA-approved elastomers such as EPDM, NBR, or PTFE to ensure compatibility with CIP and SIP procedures.

Signs That a Gaulin Suction Valve Needs Replacement

Because suction valves are wear parts, regular inspection is essential. Replace the suction valve if you observe:

• Loss of pump capacity or poor priming
• Unstable inlet pressure
• Product flowing back into the supply line
• Increased noise or vibration in the pump head
• Visible wear, pitting, or deformation

Operating with a worn suction valve can lead to accelerated damage of valve seats, discharge valves, plungers, and packing sets.

Maintenance and Service Recommendations

Bos Homogenisers recommends inspecting suction valves during every major pump service. Typical guidelines include:

• Inspection every 1,000–1,500 operating hours
• Replacement during scheduled preventive maintenance
• Always replacing seals when installing a new valve

Using OEM-compatible suction valves helps maintain pump efficiency and extends the lifespan of surrounding components.

Bosのホモジナイザーを選ぶ理由

Bos Homogenisers is a trusted supplier of spare parts for Gaulin homogenisers worldwide. Customers choose us because we offer:

• OEM-quality suction valves with guaranteed fit
• Fast identification based on model and serial number
• Extensive stock for current and legacy machines
• Technical support from homogeniser specialists
• Worldwide express shipping

We support both end users and service companies with parts, documentation, and maintenance advice.

Ordering a Gaulin Suction Valve

Ordering your replacement suction valve is simple:

1. Send us your Gaulin model and serial number
2. We identify the correct suction valve specification
3. You receive a fast quotation and lead time
4. We ship worldwide from our European warehouse

Complete pump valve kits are also available, including suction valve, discharge valve, valve seats, and gaskets.

Technical Support and Documentation

Our technical team can assist with:

• Exploded drawings and part identification
• Valve installation guidance
• Preventive maintenance planning
• Cross-referencing obsolete Gaulin part numbers

見積依頼

If you are looking for a high-quality Gaulin suction valve, Bos Homogenisers is your reliable partner. Contact us today for expert advice and fast delivery.

Eメール info@boshomogenisers.com

電話 +31 (0)123 456 789

Request a Quote for Gaulin Suction Valve

Related Gaulin Spare Parts

Looking for other Gaulin homogeniser spare parts? Browse our complete range of Gaulin replacement components:

• ゴーリン安全弁 – Pressure safety valves
• ゴーリンシリンダーブロック – 高精度シリンダーブロック
• ゴーリンアクチュエーターパッキン – アクチュエータ用シールパッキン
• ゴーリン・プランジャー・パッキン – Plunger sealing packings
• ゴーリンシリンダーブロック – 高精度シリンダーブロック

View all Gaulin spare parts →

他社製の互換製品

BOS Homogenisersでは、主要なホモジナイザーメーカー各社に対応した純正交換部品を取り扱っています：

APV 純正部品 | ラニーのスペアパーツ | SPX スペアパーツ