ゴーリンシリンダーブロックスペアパーツ

Gaulin Cylinder Blocks – New and 2nd Hand Replacement Solutions

Gaulin cylinder blocks are the structural core of the liquid end in high-pressure Gaulin homogenisers. They house the plunger bores, suction and discharge valve chambers, and internal product channels that enable controlled pressure build-up and stable product flow. The dimensional accuracy and structural integrity of the cylinder block directly influence homogeniser performance, sealing efficiency, and service life.

で ボス・ホモジナイザー, we supply precision-engineered ゴーリンシリンダーブロック for a wide range of Gaulin homogeniser models. Depending on your maintenance strategy and operational requirements, we offer new and 2nd hand cylinder block solutions. Our focus is to provide reliable, technically correct replacements that integrate seamlessly into your existing machine configuration.

If you are searching for specific Gaulin pump valve article numbers or want to verify which parts match your homogeniser, you can consult our complete spare parts overview at cylinder parts.

What Are Gaulin Cylinder Blocks?

The cylinder block is the main pressure-bearing component of the homogeniser liquid end assembly. It provides the housing for the plungers and ensures accurate alignment of valve seats and sealing systems. During operation, the plungers reciprocate within precisely machined bores, generating high pressure that forces product through the homogenising valve.

Gaulin cylinder blocks must withstand:

High internal hydraulic pressure and pressure fluctuations

Continuous cyclic mechanical loading

Thermal stress from hot product or CIP cleaning

Chemical exposure from cleaning agents

Because these components operate under demanding conditions, precision machining and correct material selection are essential for maintaining performance and preventing premature wear.

Types of Gaulin Cylinder Blocks

Different types of Gaulin cylinder blocks are used across the Gaulin homogeniser range. The correct execution depends on machine series, pressure rating, and process requirements. Bos Homogenisers supports identification and supply of the appropriate cylinder block configuration.

Standard Production Cylinder Blocks

Designed for industrial dairy, food, and beverage applications, these cylinder blocks are manufactured to support stable pressure generation and reliable sealing performance.

High-Pressure Cylinder Blocks

Used in systems operating at elevated pressure ranges, these blocks are engineered to maintain structural stability and dimensional accuracy under increased mechanical load.

Laboratory and Pilot Cylinder Blocks

Compact cylinder blocks designed for laboratory and small-scale homogenisers, prioritizing precision, repeatability, and ease of cleaning.

Legacy and Custom-Matched Cylinder Blocks

For older or discontinued Gaulin machines, Bos Homogenisers can assist in identifying suitable replacement blocks based on machine model and liquid end configuration.

New and 2nd Hand Gaulin Cylinder Blocks

Maintenance planning varies between facilities. Some operators prioritize maximum lifetime through new components, while others seek cost-effective solutions for specific applications. We therefore offer new and 2nd hand Gaulin cylinder blocks.

New Cylinder Blocks

Manufactured to OEM-equivalent dimensional tolerances

Suitable for long-term reliability and full overhaul projects

Ready for installation in correctly specified liquid ends

2nd Hand Cylinder Blocks

Selected and prepared for reuse where applicable

Cost-effective solution for certain maintenance scenarios

Potentially shorter lead times depending on availability

All cylinder blocks must match the original machine configuration to ensure correct plunger alignment and sealing performance.

一般的な摩耗および故障のメカニズム

Over time, Gaulin cylinder blocks may experience:

Plunger bore wear leading to increased leakage

Surface scoring caused by contamination

Corrosion from aggressive cleaning chemicals

Erosion at valve interfaces in abrasive applications

Fatigue cracking under long-term cyclic loading

Operating with a worn cylinder block can accelerate packing wear, reduce pressure stability, and compromise homogenisation efficiency. Timely replacement helps prevent secondary damage to plungers, valves, and sealing components.

Why Precision Matters in Gaulin Cylinder Blocks

The alignment of plunger bores within the cylinder block is critical. Even minor dimensional deviations can cause uneven loading on packings and seals, leading to premature failure. A properly specified cylinder block supports:

Consistent pressure generation

Reduced leakage risk

Extended packing service life

Predictable maintenance intervals

Bos Homogenisers ensures correct matching of cylinder block dimensions to your Gaulin homogeniser model and liquid end configuration.

Industries Using Gaulin Cylinder Blocks

Gaulin homogenisers are widely used in:

乳製品加工

食品・飲料製造

医薬品製造

バイオテクノロジー

化学・工業処理

Each industry has specific operational requirements regarding pressure levels, hygiene standards, and cleaning regimes. We assist customers in selecting the correct cylinder block solution accordingly.

Gaulin Machines for Which We Deliver Spare Parts

Bos Homogenisers supplies cylinder blocks and spare parts for the following Gaulin homogeniser series:

シリーズ	モデル
Gaulin MC Series	MC2, MC4, MC7, MC15, MC18, MC25, MC30, MC45, MC60, MC75, MC100, MC120, MC140
Gaulin G Series	G5, G15, G24, G37, G55, G75, G90, G110T, G125, G132, G185, G275
Gaulin R Series	R5、R15、R24、R37、R55、R75、R90、R110T、R125T、R132T、R132Q、R185Q、R275Q
Gaulin TPS Series	TPS Series homogenisers

Request a Quote for Gaulin Cylinder Blocks

If you are searching for ゴーリンシリンダーブロック, whether new and/or 2nd hand, Bos Homogenisers can support you with the correct technical solution.

連絡先 BOSホモジナイザーお見積もりはこちらから。. Provide your machine model, serial number, operating pressure, and application details. Our specialists will ensure you receive the correct cylinder block for optimal performance and long service life.