ゴーリンシリンダーブロックスペアパーツ

Gaulin Cylinder Blocks – High-Pressure Pump Blocks for Homogenisers

Looking for a reliable Gaulin cylinder block for your homogeniser? Bos Homogenisers supplies OEM-compatible cylinder blocks designed for Gaulin high-pressure homogenisers used in food, dairy, pharmaceutical, biotech, and industrial processing. The cylinder block is a critical structural component of the pump section and plays a central role in pressure generation, sealing performance, and long-term machine reliability.

Gaulin homogenisers are known for their robust design and long service life. However, after years of operation under extreme pressure and cyclic loads, cylinder blocks may require inspection, refurbishment, or replacement to maintain safe and efficient operation.

If you are searching for specific Gaulin Cylinder block article numbers or want to verify which parts match your homogeniser, you can consult our complete spare parts overview at cylinder parts.

What Is a Gaulin Cylinder Block?

The Gaulin cylinder block, sometimes referred to as the pump block, is the main housing in which the plungers move back and forth to pressurise the product. It contains the pump cylinders, valve housings, and sealing interfaces required for controlled product flow and pressure build-up.

The cylinder block must withstand very high internal pressures while maintaining precise alignment between plungers, seals, and valves. Any deformation or wear directly affects homogeniser performance.

Function of the Cylinder Block in a Gaulin Homogeniser

Houses the pump cylinders and plunger bores

Supports suction and discharge valve assemblies

Provides sealing surfaces for gaskets and O-rings

Maintains precise alignment of plungers and seals

Withstands high cyclic pressure loads during operation

Because so many critical components interface with the cylinder block, dimensional accuracy and surface quality are essential.

Gaulin Cylinder Block Design

Gaulin cylinder blocks are typically machined from solid forged or cast material and finished to tight tolerances. The design varies depending on machine size, number of plungers, and pressure rating.

Common configurations include:

Single-cylinder blocks for laboratory or pilot homogenisers

Multi-cylinder blocks for industrial-scale production

Blocks with integrated valve chambers

Blocks designed for single-stage or two-stage operation

ゴーリンホモジナイザー対応機種

Bos Homogenisers supplies Gaulin cylinder blocks compatible with a wide range of machines, including:

ゴーリンMCシリーズ（MC15、MC45、MC100、MC200、MC400）

Two-stage homogenisers with integrated pump blocks

Legacy Gaulin machines still in active service

Correct identification is based on machine model, serial number, plunger size, and operating pressure.

Materials and Manufacturing

Gaulin cylinder blocks are manufactured from high-strength materials selected for pressure resistance and fatigue life:

High-grade stainless steel for food and pharmaceutical applications

Forged alloy steel for extreme pressure conditions

Corrosion-resistant materials for aggressive cleaning regimes

All blocks are precision-machined and inspected to ensure correct bore geometry, flatness of sealing surfaces, and valve alignment.

Wear and Damage Mechanisms

Over time, cylinder blocks may suffer from wear or damage caused by:

Plunger scoring or misalignment

Seal failure leading to erosion of sealing surfaces

Valve impact or cavitation damage

Corrosion from aggressive cleaning chemicals

Thermal cycling and pressure fatigue

Early detection of these issues can prevent catastrophic failure and costly downtime.

When Should a Gaulin Cylinder Block Be Replaced?

Replacement or refurbishment of the cylinder block may be required if you observe:

Cracks or deformation in the block

Out-of-round or damaged plunger bores

Persistent leakage despite new seals

Misalignment causing repeated seal or plunger failure

In some cases, blocks can be refurbished by re-machining or sleeving. In other cases, full replacement is the safest option.

Installation and Alignment Considerations

Installing a Gaulin cylinder block requires careful alignment and attention to detail:

Ensure mating surfaces are clean and undamaged

Use new gaskets and O-rings during installation

Verify plunger alignment and concentricity

Torque fasteners according to specification

Improper installation can lead to rapid wear of seals, plungers, and valves.

Maintenance Best Practices

To maximise the service life of your cylinder block:

Inspect plunger bores during major overhauls

Replace seals and guiding components on schedule

Monitor for unusual vibration or pressure instability

Use compatible materials for product and cleaning chemicals

Preventive maintenance helps avoid costly block damage.

Bosのホモジナイザーを選ぶ理由

Bos Homogenisers is a specialist supplier of aftermarket spare parts for Gaulin homogenisers. Customers worldwide rely on us for:

OEM-compatible Gaulin cylinder blocks

レガシーおよび製造中止のゴーリンマシンをサポート

モデル番号とシリアル番号による迅速な識別

Expert technical advice on pump block refurbishment or replacement

迅速な世界配送

How to Order a Gaulin Cylinder Block

Ordering a replacement cylinder block is a structured process:

ゴーリンホモジナイザーの型番とシリアル番号をお知らせください。

Confirm operating pressure and plunger configuration

Receive a quotation and technical confirmation

欧州の倉庫からの世界中への発送

Associated components such as plungers, seal kits, valve kits, and adaptors can be supplied together to simplify installation.

見積依頼

If you need a reliable Gaulin cylinder block for your homogeniser pump assembly, Bos Homogenisers is your trusted partner for high-quality aftermarket components.

メールアドレス：info@boshomogenisers.com

電話番号：+31 (0)123 456 789

Request a Quote for Gaulin Cylinder Block