APV ホモジナイジングバルブ部品スペアパーツ

APV Homogenising Valves

APV homogenising valves are the core wear components of the homogenising assembly. They directly influence pressure stability, droplet/particle size reduction, and overall process consistency. At BOSホモジナイザー, we supply APV-compatible homogenising valve components designed for reliable performance in demanding hygienic and industrial applications.

If you are planning maintenance, troubleshooting pressure loss, or upgrading materials for longer lifetime, our parts program supports a wide range of APV homogenisers with fast delivery and technical support. Start here: スペアパーツ or go directly to 連絡先.

If you are searching for specific APV homogenising valve part article numbers or want to verify which parts match your homogeniser, you can consult our complete spare parts overview at ホモ・バルブ部品またはホモバルブの構成部品。.

Key Designs: Plug Valve, Pilot Valve, Knife Edge and Microgap Valve

APV homogenising valve configurations vary by application, product characteristics and required pressure range. BOS Homogenisers supplies components for common valve concepts including:

Plug valve configurations for controlled restriction and stable operation

Pilot valve arrangements (often used to stabilize pressure and flow behavior across stages)

Knife edge style geometries where edge definition and surface condition are critical for performance

Microgap valve designs where a precisely controlled micro-gap determines shear and turbulence intensity

For complete support across the homogenising assembly, also see: Homogenising Valves.

Materials for Wear Resistance: Ceramic Valve, Stellite Valve and TC Valve

Material choice is often the fastest route to longer run time and lower cost per operating hour. BOS Homogenisers supplies parts that match common APV performance requirements, including:

Ceramic valve components for strong corrosion resistance and stable performance in aggressive CIP regimes

TCバルブ (tungsten carbide) components for high hardness and abrasion resistance

Stellite valve solutions where wear resistance is required under demanding process conditions

Material selection is typically determined by product abrasiveness, operating pressure, temperature, cleaning chemistry, and required lifetime. If you want guidance, use our contact form and share your homogeniser model plus operating conditions.

Homogenising Valve Seats and Impact Rings

Homogenising valve seats are critical sealing and wear surfaces. In practical terms, seat condition often determines whether a homogeniser can reach and hold target pressure. Worn seats can cause pressure instability, reduced homogenising efficiency, and accelerated wear of the valve and mating surfaces.

インパクト・リング are equally essential. They contribute to the final stage of homogenisation by impact and protect the valve body/housing from erosive wear. Choosing the correct impact ring material and geometry is especially important when operating with high-pressure settings or abrasive products.

To keep maintenance structured and predictable, we recommend planning spare parts as a kit: valve + seat + impact ring (and where applicable, related holders and guides). Visit: サービス

当社がスペアパーツを供給しているAPV製機械

BOS Homogenisers supplies spare parts support for APV machines, including the model series below. For requests, contact our support.

ブランド	モデル／シリーズ
APV	APV 1000
APV	APV 2000
APV	Lab 15MR
APV	Lab 31MR
APV	Lab 60
APV	Lab 100

Request the Right APV Homogenising Valve Set

To quote the correct combination of plug valve / pilot valve geometry, knife edge surface requirements, or a microgap valve configuration, together with ceramic valve, stellite valve or TC valve wear parts, please share: