Gaulin Drip Rings – Leakage Control Components for High-Pressure Homogenisers

Op zoek naar hoge kwaliteit Gaulin druipringen? Bos Homogenisers supplies OEM-compatible drip rings used in the plunger seal assemblies of Gaulin homogenisers. These small but vital components help prevent contamination, detect seal wear, and control fluid leakage — protecting both the pump and your product integrity.

Drip rings are often overlooked, but they play a key role in ensuring safe, hygienic, and leak-free homogenisation in food, dairy, pharmaceutical, and biotech applications.

If you are searching for specific Gaulin drip ring article numbers or want to verify which parts match your homogeniser, you can consult our complete spare parts overview at plunger components.

What Are Drip Rings in a Gaulin Homogeniser?

Drip rings, also known as leakage rings of slinger rings, are mounted after the high-pressure seals in a Gaulin pump assembly. Their primary role is to control any product or lubricant that escapes past the main seals and redirect it to a visible drain or collection point.

This not only prevents unwanted leakage into the gear housing or frame, but also allows operators to visually detect seal wear or failure before it escalates into a major issue.

Main Functions of a Gaulin Drip Ring

• Prevents product or oil from leaking into the frame or motor section
• Acts as a secondary barrier after the main pressure seal
• Helps visually detect early seal wear (e.g., drip at drain port)
• Supports hygienic operation by avoiding cross-contamination
• Protects the homogeniser’s internal components from fluid ingress

Where Are Drip Rings Installed?

Drip rings are installed in the plunger seal housing, specifically:

• Behind the high-pressure plunger seal
• Before the atmospheric vent or drain line
• Near the guiding bushing or retainer in some configurations

They are often included in complete seal kits, especially when used with Gaulin MC-series and legacy machines.

Compatible Gaulin Models

We supply drip rings for a wide range of Gaulin homogenisers, including:

• MC15, MC45, MC100, MC200, MC400
• Single-stage and two-stage configurations
• Custom and legacy models (on request)

Providing your machine’s model and serial number allows us to identify the correct ring dimensions and material.

Material Options

Gaulin drip rings must be chemically compatible with both product and cleaning agents. We offer materials such as:

• PTFE (Teflon®): Excellent for CIP/SIP and aggressive cleaning conditions
• EPDM: Ideal for hot water and steam sterilisation
• NBR (Nitrile): Cost-effective for food-grade oil and water-based products
• Viton® (FKM): High chemical and heat resistance

All materials are available with FDA compliance and EU 1935/2004 certification for food and pharmaceutical use.

When to Replace a Gaulin Drip Ring

Although not a pressure-bearing seal, the drip ring should be replaced regularly. Signs it’s time for a replacement include:

• Visible product or oil leakage from drain port
• Contamination in the gear section or motor housing
• Regular wear detected during seal kit replacement

It’s best practice to replace the drip ring every time the main plunger seals are changed, especially in high-duty operations.

Why Drip Rings Matter

Drip rings protect the internal environment of your Gaulin homogeniser. Without them, even minor seal wear could result in contamination of mechanical parts or the outside environment.

In regulated industries such as food and pharma, this could lead to downtime, hygiene violations, or expensive repairs. A simple drip ring serves as an early warning and a physical barrier to escalation.

Maintenance Recommendations

• Inspect drip rings every 500–1000 hours of operation
• Replace during every scheduled seal change
• Ensure correct material is used based on product and cleaning chemistry
• Check that drain ports are clear and functional

Failure to maintain the drip ring can lead to undetected seal failure and risk to the homogeniser’s internal components.

How to Order a Gaulin Drip Ring

Ordering your replacement drip ring is easy:

1. Stuur ons het model en het serienummer van uw Gaulin-apparaat
2. We identify the correct ring based on machine design and plunger size
3. You receive a fast quotation and lead time
4. We ship worldwide – express options available

You can also order drip rings as part of a complete seal kit of maintenance package for your plunger assembly.

Waarom kiezen voor Bos-homogenisatoren?

Bos Homogenisers is the trusted name in spare parts for Gaulin machines. Customers worldwide rely on us for:

• OEM-quality drip rings with guaranteed compatibility
• Rapid technical support and part identification
• Stock for both current and discontinued Gaulin models
• Expertise in sealing, maintenance, and installation
• Fast global delivery from our European warehouse

Technical Support & Documentation

We can assist with:

• Seal diagrams and exploded views
• Material compatibility recommendations
• Installation tips and maintenance plans
• Cross-referencing legacy part numbers

Een offerte aanvragen

If you need a durable, OEM-fit Gaulin drip ring or complete seal kit, contact Bos Homogenisers today. We provide fast service, expert support, and reliable global delivery.

E-mail: info@boshomogenisers.com

Telefoon: +31 (0)123 456 789

Request a Quote for Gaulin Drip Rings

Bijbehorende Gaulin-reserveonderdelen

Op zoek naar andere reserveonderdelen voor Gaulin-homogenisatoren? Bekijk ons volledige assortiment Gaulin-reserveonderdelen:

• Gaulin actuatorpakkingen – Afdichtingen voor aandrijvingen
• Gaulin Dompelring – Slijtringen voor zuigers
• Gaulin veiligheidskleppen – Overdrukventielen
• Gaulin pompventiel – Aanzuig- en perskleppen
• Gaulin pomp klepzittingen – Aanzuig- en perskleppen

Bekijk alle Gaulin-reserveonderdelen →

Compatibele alternatieven van andere merken

BOS Homogenisers levert compatibele reserveonderdelen voor alle grote merken homogenisatoren:

APV-reserveonderdelen | Rannie-reserveonderdelen | SPX-reserveonderdelen